GP30A thru gp30m 50v-1000v 3.0a web site: www.taychipst.com 1 of 2 features e-mail: sales@taychipst.com maximum ratings and electrical characteristics m e c h a n i c a l d a t a glass passivated junction rectifier plastic package has underwriters laboratory flammability classification 94v-0 high temperature metallurgically bonded construction glass passivated cavity-free junction capable of meeting environmental standards of mil-s-19500 1.5 ampere operation at t a =55c with no thermal runaway typical i r less than 0.1 m a high temperature soldering guaranteed: 350c/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension case: jedec do-204ac molded plastic over glass body terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 0.015 ounce, 0.4 gram ratings at 25c ambient temperature unless otherwise specified. gp gp gp gp gp gp gp symbols 30a 30b 30d 30g 30j 30k 30m units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 volts maximum rms voltage v rms 35 70 140 280 420 560 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 volts maximum average forward rectified current 0.375" (9.5mm) lead length at t a =55c i (av) 3.0 amps peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 125.0 amps maximum instantaneous forward voltage at 3.0a v f 1.2 1.1 volts maximum reverse current t a =25c 5.0 at rated dc blocking voltage t a =150c i r 100.0 m a maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at t a =55c i r(av) 100.0 m a maximum reverse recovery time (note 1) t rr 3.0 m s typical junction capacitance (note 2) c j 40.0 pf typical thermal resistance (note 3) r q ja 20.0 c/w r q jl 10.0 operating junction and storage temperature range t j , t stg -65 to +175 c notes: (1) reverse recovery test conditions: i f =0.5a, i r =1.0a, i rr =0.25a (2) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (3) thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, p.c.b. mounted
GP30A thru gp30m ratings and characteristic curves GP30A thru gp30m e-mail: sales@taychipst.com web site: www.taychipst.com 2 of 2 glass passivated junction rectifier 50v-1000v 3.0a 0 25 50 75 100 125 150 175 0 1.0 2.0 3.0 4.0 110100 10 100 200 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 0.1 1 10 100 1 10 100 10 100 0 20 40 60 80 100 0.01 0.1 1 10 ambient temperature, c average forward rectified current, amperes fig. 2 - maximum non-repetitive peak forward surge current number of cycles at 60 h z peak forward surge current, amperes fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse characteristics instantaneous forward current, amperes instantaneous reverse leakage current, microamperes instantaneous forward voltage, volts percent of rated peak reverse voltage, % fig. 5 - typical junction capacitance junction capacitance, pf reverse voltage, volts t j =125c t j =75c t j =25c t j =25c pulse width=300 m s 1% duty cycle t j =25c f=1.0 mh z vsig=50mvp-p fig. 1 - forward current derating curve 0.375" (9.5mm) lead length t j =t j max. 8.3ms single half sine-wave (jedec method) 60 h z resistive or inductive load
|
